Tritech Research's energy efficient, digital, heating and cooling incubator allows you to set your desired temperature in a matter of seconds and maintain it with about 0.1°C precision. Our electronic thermostat and thermoelectric pump replace the traditional controllers, heating coils and Freon systems that waste energy and take hours to calibrate for your experiments.
Our solid-state Temperature Control Module is precise within 0.1°C up to 50°C when heating, and down to 10°C when cooling. The temperature probe is movable so that you can control the temperature more accurately within a container if your experiment demands it.
Entirely insulated, our incubator has an internal fan to re-circulate the inside air for even temperature distribution without drying out your samples. The 32 liter interior dimension (16" x 14" x 21") can hold 100 100mm dishes, 400 60mm dishes or 1000 35mm dishes.
Great for temperature-shift experiments!
1 Full-year warranty.
$499.00: Standard model (heating or cooling mode is choosen manually)
$649.00: Smart Controller model (unit can switch between modes automatically
as room temperature changes - necessary only when room temperature can
swing from one side to the other of your desired temperature.)
Available options include: internal electric sockets, lights, timers, and portable 12 volt DC operation.
It's a hot plate and a cold plate!
The Tritech Research Heating/Cooling DigiTherm Controller used with our popular incubator is also available as a DigiTherm temperature controlled Bench Plate/Microscope Stage model. It lets you perform constant temperature observation and experimentation at the bench instead of in a constant temperture room. It's ideal for frog, worm, insect and mammalian development studies (10°C-50°C). Inquire about custom specifications and pricing.
From $700.00 (custom made)
Put an end to long term "arctic exploration" with the Tritech Research Freez-O-File. The Freez-O-File is a simple idea: a utility drawer system with integral temperature stabilizers! It is the ideal place to organize and store enzymes and buffers in your -20°C freezer. Not only does it allow you to take the enzymes you want to the bench while keeping them safe and cold, it lengthens the life of sensitive enzymes by protecting them from temperature fluctuations when the freezer door is left open or the freezer goes through a defrost cycle.
$ 89.00
Hassle-free cryopreservation !
Don't go through the hassle and expense of running around to get liquid Nitrogen, or dry ice and ethanol or acetone, every time you want to quick-freeze your samples. With our PappaCooler and an -80°C freezer you can always be prepared. Store the PappaCooler unit in your freezer. Bring it to your bench when you are ready to quick-freeze your samples; insert them in the unit and they are frozen. The design has been optimized to produce ultra-high-efficiency frozen competent cells and to give high survival rates when Cryo-preserving prokaryotic and eukaryotic cells.
Not only will you be saving time and money using the PappaCooler, but you will also be saving the environment from solvents and gases that require lots of energy to produce. The PappaCooler is made partly from recycled materials.
$ 49.00
HIGH-TECH
TRITECH CARBOYS AND ICE BUCKETS
These products are a WAY better value than the carboys, ice buckets, and ice trays still used in many laboratories. Ours all have tough, chemically-resistant polyethylene interiors, and many convenient features.
Nalge's Nalgene 10 and 20 liter carboys are sold between $60 and $90, whereas ours are only $30 to $50! Our carboys have strong, comfortable grip handles to make carrying and refilling easier, plus there is a special fast-flow, recessed spigot!
Fisher sells the "traditional" ice buckets for $50 to $70! Unbelievable!?! Well, Tritech Research comes to the rescue with high-tech injection molded polyethylene/polypropylene mini-ice chests filled with super-insulating polyurethane foam. They have attached lids that flip open (or detach if you prefer), and they are rectangular, just like your tube racks. These coolers keep your ice from melting for a long, long time, so you don't have to worry about your samples floating away. All models have comfortable, folding handles to make carrying them to and from the ice machine a breeze. Priced at just $25 to $50, once you use them, you can't believe you put up with the old ones for all those years.
$ 25.00 - $ 50.00
